Pick the right GIK Product
No one room is going to be the same, so we have created many options for treating several types. Introducing the Acoustics Comparison Tool, a guide to help you decide. You can filter, search, and compare, and when you’re done, you can even print.
We are committed to making sure you have the best tools available to help you decide based on your requirements. Our main goal is to aide in narrowing down the long list of products we have, in order to get you to the products you need most.
Tips for Planning
There is no doubt our acoustic treatments are going to perform best with proper and specific placement. While we do provide you with this handy tool, one place to start is to think about what each device is doing at each frequency. The best course of action is to reach out to us for free expert advice for a tailored plan for your unique space.
Related Articles
What Are Room Modes | GIK Acoustics
Room modes are resonances caused by a room’s dimensions that affect sound quality, especially in the low end. The three types—axial, tangential, and oblique—can create peaks, nulls, and uneven decay, making audio inaccurate and inconsistent.
These issues can be identified using measurement tools or simple listening tests, and are best addressed with acoustic treatment. Placing bass traps in corners, using panels at reflection points, adding diffusion, and optimizing speaker and listening position all help create a more balanced and reliable listening environment.
Mounting GIK Acoustics Products in Corners | GIK Acoustics
This video contains simple instructions for mounting GIK Acoustics products in corners. This video is helpful if you choose to install the FlexRange® Acoustic Panel or FlexRange® Bass Panel in the corner. Measure from the ceiling and mark where you want the panel to be positioned. Next, measure 13″ from the corner to indicate where to place your hook. GIK Acoustics products come with hanging hardware, like the picture wire used in the video. Cut two 8″ lengths of wire. Fasten the wire to eye hooks on both sides of the panel. Now you are ready to hang the panel in the corner simply by attaching the wire to the hooks.
